In my January financial update, I mentioned that we “somewhat on a whim” replaced our back door. I started to tell the story there, but I had more to share about the process and how we went about it.

We purchased our home in June 2022 with a sliding door out to the deck. This is the first house we’ve had with a slider. It’s not my preference, but it wasn’t worth putting any energy into.

Over the last year and a half, we’ve had trouble with it. The lock mechanism kept freezing on us, making it difficult to unlock the door to let the dog in and out. The door was also very heavy and/or hard to open. Our slider in the basement is much easier to move, but this one just wouldn’t budge without a lot of effort. On top of all that, there were vertical blinds over the door. I had no problem with how they looked. However, they weren’t installed correctly to begin with (the story of everything in this house, apparently), and the stick used to open and close them were on the wrong side. Then add in a one-year-old pulling on the blinds. Slats kept breaking, I was being blinding by the sun, and I was tired of fighting the baby to stop pulling at them.

In our Virginia home, we had a french door style (although one side was stationary) back door. Then in our last home, we had a regular back door, but there were blinds between the windows. That was my dream at this point: blinds between the glass so that they weren’t pulled or broken by kids, and a door instead of slider. I really didn’t want to hang curtains over the doors or manage blinds that get attached to the side of the door.

FINANCIALLY

We had a window company come out for a quote. He said that some work may need to be done to adjust the opening because it’s not a standard opening, but didn’t say much else. He went through all the details and finished out our meeting with a quote of $9,300. I can’t even begin to explain how that wasn’t even close to reasonable. He said it wasn’t a custom door and claimed that adding the blinds to the door was $2,100. No thanks.

The door I wanted was at Home Depot for $995. Seriously. It hit all the specs I wanted. The door was primed, not painted. To order the door painted white, it was going to be $2,200. I could paint the door myself for a lot less than $1,200. Both sides actually open, even though I was going to be happy with just one side opening.

I was hesitant to buy it because the window company made me feel like I had a custom opening. A few days later, my dad came to visit, so I asked him to measure the door. He confirmed that it is a standard size door. He said that before even measuring it, he knew it was going to be a standard opening because it would be way too much money to create a custom slider. He said I should get the door, and he’d help install it. I really only wanted the door measured. I planned on having our deck contractor install it, which he said he’d do for $500.

As I looked more into it, I was able to get the door scheduled for delivery for the next day for $79. By amazing luck, it was delivered at 9:30 am, meaning we could get to work right away.

INSTALLATION

The installation process was a lot more straight forward than I expected. It’s a job that requires heavy lifting and extra hands to hold things in place every now and then, but each step is logical.

My dad removed the interior moulding, and then he cut through any screws that were between the door frame and the house. We tipped the slider outward and moved it out of the way. We then cleaned out the opening, removing any extra foam insulation and sweeping out the sill. The next step was to put 3 caulk lines on the sill. The hardest part was keeping the kids and dog from stepping on this before the new door got moved into place. The door was then lined up on the bottom and tilted into place. A couple of screws were put in to hold it while we shimmed it.

The shimming process was time consuming, but it was straight forward. The screws went straight through the holes already in place for the hinges (one screw in each hinge was longer than the others so that it would hold the door in place). Once the screws were all in place, we then put spray foam around the door. It was important to keep an eye on the spray foam so that it wouldn’t creep out and attach (and stain) to the door.

The door that was removed didn’t have the brick mould on the exterior, so it sat further into the house. The door we installed did come with the brick mould, and my dad said it was best to keep it on. This meant that our gap between the floor and door frame was bigger than we’d prefer. My dad actually removed the last row of hardwood flooring (that had been ripped down to fit the original door) and installed a new, full row of flooring (we had some on hand in the basement). That was pretty impressive to me!

FINISHING TOUCHES

We could have used the moulding around the door that was already there, but I wanted to change the look of it. While I decided on the new look, it gave the spray foam almost 24 hours to expand and dry out before we cut it back. We cut it back and installed the moulding as I designed it. I painted the moulding, while deciding on the door color.

Everything around my house is a navy, even though I’m trying to push towards a black-and-white. The kitchen backsplash was navy when we bought it, the back of the living room bookshelves are navy, the dining room walls are navy, and all the roman shades are navy. I was afraid to pick a different color, so I went with navy on the doors. I used a metal-friendly paint to hopefully prevent chipping.

The door has moulding around the glass, with screws on the interior. The hardware bag should have included plugs for the screw holes, but it didn’t. I emailed the company asking for replacements, which they sent within 2 weeks.

COST BREAK DOWN

Door: $1,142
Paint: $22
Moulding: $71
Caulk: $14

Total tangible costs are ~$1,250. We then also bought my dad gifts to pay him for his services, knowing he wouldn’t take straight cash from us.

---

For now, I’m keeping the door navy. This picture only has 2 coats of the navy; I need to do the final coat with a roller. I think I’d prefer a lighter color on the door to compliment the navy, but also so you could see the black handle and black hinges I installed. I need more time to contemplate the change. Maybe once our deck is replaced (ignore the mangled deck railing and furniture that still hasn’t been replaced/fixed from the July 2nd storm where a tree fell on it) and the weather is nicer, I’ll have an epiphany moment. For now, I’m beyond thrilled with the replacement that was under $2000 for all of it.